Enterasys Networks XSR CLI Router User Manual


  Open as PDF
of 684
 
snmp-server Commands
XSR CLI Reference Guide 1-21
Mode
Globalconfiguration:XSR(config)#
Example
Thefollowingexamplespecifies theEngineID:
XSR(config)#snmp-server engineID local 00020AF100
resultsinanengineIDof0x800015F80500020AF100
snmp-server group
ThiscommandconfiguresanewSNMPgrouptoassociateSNMPuserswithviews.
Syntax
snmp-server group group-name {v1 | v2c | v3 {auth | noauth | priv}} [read readview]
[write writeview][access access-list]
Syntax of the “no” Form
UsethenoformofthiscommandtoremoveaspecifiedSNMPgroup:
no snmp-server group group-name {v1 | v2c | v3}{auth | noauth | priv}}
Mode
Globalconfiguration:XSR(config)#
Example
Thisexamplespecifiesthev3authSNMPgroupwithauthsecurity,thev3viewforreadandwrite
access,andismatchedwithanACLwrittenearlier:
XSR(config)#snmp-server group v3auth v3 auth read v3view write v3view access 88
group
DefinesaUserSecurityModel(USM)group.
group-name
Nameofthegroup.
v1
v1securitymodel(leastsecure)used.
v2c
v2securitymodel(nexttoleastsecure)used.
v3
v3securitymodel(mostsecure)used.
auth
authNoPrivsecuritylevelused.
noauth
noAuthNoPrivsecuritylevelused.
priv
authPrivsecuritylevelused.
read
Specifiesareadviewforthegroup.
readview
Thereadviewname.
write
Specifiesawriteviewforthegroup.
writeview
Thewriteviewname.
access
Access‐listassociatedwiththisgroup.
access-list
StandardIPaccess‐listallowingaccesswiththisgroup .
 previous next