Enterasys Networks XSR CLI Router User Manual


 
Hardware Controller Clear and Show Commands
XSR CLI Reference Guide 4-101
Internet address is 54.54.54.1, subnet mask is 255.255.255.0 Secondary
Internet address is 57.57.57.1, subnet mask is 255.255.255.0 Secondary
Internet address is 58.58.58.1, subnet mask is 255.255.255.0 Secondary
The name of this device is Eth1.
The physical link is currently up.
The device is in polling mode, and is active.
The last driver error is '(null)'.
The duplex mode is set to auto-negotiated.
The current operational duplex mode is negotiated to half.
The speed is set to auto-negotiated.
The current operational speed is negotiated to 100 Mb/s.
The MAC address is (in hex) 00:01:f4:0d:26:72.
The MTU is 1500.
The bandwidth is 100 Mb/s.
Other Interface Statistics:
ifindex 0
ifType 6
ifAdminStatus 1
ifOperStatus 1
ifLastChange 00:32:39
ifInOctets 529727
ifInUcastPkts 0
ifInNUcastPkts 7328
ifInDiscards 0
ifInErrors 0
ifInUnknownProtos 0
ifOutOctets 157800
ifOutUcastPkts 0
ifOutNUcastPkts 157
ifOutDiscards 0
ifOutErrors 0
ifOutQLen 256
ThefollowingissampleoutputfromaVLANinterfaceonFastEthernetsubinterface2.1:
XSR#show interface FastEthernet 2.1
FastEthernet2.1 is Admin Up
Internet address is 1.2.3.4, subnet mask is 255.255.255.0
Other Interface Statistics:
ifOperStatus 1
ifInOctets 956932
ifOutOctets 495034
Configured VLANs:
VLAN Id 1200
ThefollowingissampleoutputfromaVLANinterfaceonFastEthernetsubinterface2.4
configuredwithPPPoE:
XSR#show interface FastEthernet 2.4
FastEthernet2.4 is Admin Up
Internet address is 5.5.5.4, subnet mask is 255.255.255.0
LCP State: OPENED
IPCP State: OPENED
The logical link is currently Up