Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

OSPF Debug and Show Commands

5-104 Configuring the Internet Protocol

OSPF Debug and Show Commands

debug ip ospf dr

ThiscommanddebugsOSPFdesignatedrouterevents.AswithallXSRdebugcommands,itisset

toprivilegelevel15bydefault.

Syntax

debug ip ospf dr

Syntax of the “no” Form

Thenoformofthiscommandreturnsthedebugfunctiontothedefault:

no debug ip ospf dr

Mode

EXECconfiguration:XSR>

Example

Thefollowingexampleindicatestheelectionofadesignatedrouter:

OSPF: Elect DR. dr:53.53.53.21 bdr:53.53.53.6 GigabitEthernet 2

Parameter Descriptions

debug ip ospf packet

ThiscommanddebugsreceivedandtransmittedOSPFpackets.AswithallXSRdebug

commands,itissettoprivilegelevel15bydefault.

Syntax

debug ip ospf packet

Note: This command does not display in running config because it is a debug function. It must be

set manually every time the XSR is rebooted.

ElectDR OSPFDRElection.

dr:53.53.53.21 Designatedrouter.

bdr:53.53.53.6 BackupDesignatedrouter.

GigabitEthernet2 Interfaceonwhichthedesignatedrouterresides.

Note: This command does not display in running config because it is a debug function. It must be

set manually every time the XSR is rebooted.

previous next