Filter
Top Products
Frame Relay Map Class Commands
XSR CLI Reference Guide 9-95
Syntax of the “no” Form
Thenocommanddeletestheinterface:
no interface serial port_num interface_num
Mode
Globalconfiguration:XSR(config)#
Examples
Thisexampleselectsinterfaceserial1/0andsetsFrameRelayencapsulation:
XSR(config)#interface serial 1/0
XSR(config-if<S1/0>)#encapsulation frame-relay
XSR(config-if<S1/0>)#no shutdown
Thefollowingexampleselectschannelgroup12oftheT1/E1port1onthesecondNIMcardsothat
laterconfigurationswillapplytothisserialport:
XSR(config)#interface serial 2/1:12
XSR(config-if<s2/1:12)#encapsulation frame-relay
XSR(config-if<S1/0>)#no shutdown
Frame Relay Map Class Commands
class
ThiscommandassignsamapclasstoaspecificData‐LinkConnectionIdentifier(DLCI).Thiscan
beusedtooverridethedefaultvaluesfortheDLCIsortooverrideaclassassignedtotheinterface
orsub‐interfacethattheDLCIbelongsto.
Theactualmapclassisdefinedusingthe
map-class frame-relaycommandinGlobal
configurationmode.ThiscommandonlyappliestoassigningamapclasstoDLCIs.
Syntax
class name
Syntax of the “no” Form
ThenocommandremovestheassignedmapclassfromtheDLCI.
no class name
Note: Leading zeros defined in interface_num can be omitted. For example, 0/1/2 is equivalent to 1/
2.
Note: You cannot directly delete a Serial interface assigned to a T1/E1 channel group. You must
instead delete a channel group to erase the Serial port.
name
NameofthemapclasstoassociatewiththisDLCI,upto29characters.