Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

BGP Configuration Commands

XSR CLI Reference Guide 6-95

neighbor ebgp-multihop

ThiscommandconnectstheBGPneighborsonnetworksthatarenotdirectly‐connectedtothe

networkoftherouterthatthiscommandisenteredon.Beforeenteringthiscommand,aneighbor

orpeergroupmustbeidentifiedbymeansofthe

neighbor remote-as orneighbor peer-group

command.

Syntax

neighbor {ip-address | peer-group-name} ebgp-multihop

Syntax of the “no” Form

Thenoformofthiscommandremovesthespecifiedneighbor:

no neighbor {ip-address | peer-group-name} ebgp-multihop

Mode

Routerconfiguration:XSR(config-router)#

Default

Notenabled

Example

Thefollowingexampleallowsconnectionstoorfromneighbor192.168.1.1,whichresidesona

networkthatisnotdirectlyconnected:

XSR(config)#router bgp 100

XSR(config-router)#neighbor 192.168.1.1 remote-as 101

XSR(config-router)#neighbor 192.168.1.1 ebgp-multihop

neighbor filter-list

ThiscommandsetsupaBGPfilterbasedonASpath.Beforeenteringthiscommand,aneighboror

peergroupmustbeidentifiedbymeansofthe

neighbor remote-asorneighbor peer-group

command.Also,theASpath‐basedaccesslistmustbeconfigured.

Syntax

neighbor {ip-address | peer-group-name} filter-list filter-list {in | out | weight

value}

ip-address

Neighbor’sIPaddress.

peer-group-name

BGPpeergroupbyname.Range:1to64characters.

Note: Perform a clear ip bgp neighbor <IP address> whenever this command is changed.

ip-address

Neighbor’sIPaddress.

previous next