Enterasys Networks XSR CLI Router User Manual


  Open as PDF
of 684
 
Multilink PPP Commands
8-112 Configuring the Point-to-Point Protocol
Syntax
ppp bap number {default phone-number}
Syntax of the “no” Form
ThenocommandremovesaBAPphonenumber:
no ppp bap number {default phone-number}
Mode
DialerInterfaceconfiguration:XSR(config-if<Dx>)#
Example
Thefollowingexamplespecifies theBAPdefaultphonenumber:
XSR(config)#interface dialer 1
XSR(config-if<D1>)#ppp bap number
ppp bap timeout
ThiscommandconfiguresBandwidthAllocationProtocol(BAP)actiontimeoutstosetup
Bandwidth‐on‐Demand(BoD).
The
multilink load-thresholdcommandisasecondmeansbywhichtheXSRcontrolstraffic
viaBoD.Itisalsoprovidedbysettingthe
multilink min-links command.
Syntax
ppp bap timeout {pending seconds | response seconds}
Syntax of the “no” Form
ThenocommanddeletesBAPactiontimeouts:
no ppp bap timeout {pending | response}
Defaults
•Pendingseconds:20
• Responseseconds:20
Mode
DialerInterfaceconfiguration:XSR(config-if<Dx>)#
default phone-number
Primarynumberforincomingcalls.Upto5numberscanbeentered.
pending seconds
Waitintervalforpendingactions.Range:2to180seconds.
response seconds
Waitintervalforresponsepackets.Range:2to180seconds.
 previous next