Filter
Top Products
DOD/BOD Commands
10-102 Configuring the Dialer Interface
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
Defaults
•Attempt:1(noredial)
•Interval:10seconds
•Re‐enable:5seconds
Example
AssumingyouhaveconfiguredSerialinterfaces1/0,1/1,and 1/2aspartofdialerpool1,the
followingexamplesetsthedialertoattemptdialingeachinterfacefivetimes(ifallattemptsare
unsuccessful),indefinitelyuntilthedialtriggerisresetoraconnectionissuccessfullyestablished.
XSR(config)#interface dialer 1
XSR(config-if<D1>)#dialer pool 1
XSR(config-if<D1>)#dialer redial attempts 5 forever
dialer remote-name
Thiscommandspecifies,foradialerinterface,thePPPauthenticatedusernameoftheremote
routerthatiscallingin.
Syntax
dialer remote-name username
Mode
DialerInterfaceconfiguration:XSR(config-if<Dx>)#
Example
Thefollowingexamplesetstheauthentication namefortheremoterouteronDialerinterface7:
XSR(config)#interface dialer 7
XSR(config-if<D1>)#dialer remote-name “Auth West”
n Number of redial attempts made if dial-up or ISDN connection establishment
fails, ranging from 1 to 65535.
interval Period between redial attempts.
m Interval period, ranging from 5 to 2678400 seconds (31 days).
re-enable Period for which the port is disabled if all redial tries fail.
t Re-enable period, ranging from 5 to 2678400 seconds.
forever Number of redial attempts applied to all members of the dialer pool in a never-
ending loop if dial-up or ISDN connection establishment is unsuccessful. Redial
attempts end if the dial trigger is reset or the connection is established.
username Case-sensitive character string identifying the remote device with a maximum
length of 255 characters.