Filter
Top Products
Frame Relay Map Class Commands
9-100 Configuring Frame Relay
Syntax of the “no” Form
no map-class [frame-relay | dialer] map-class-name
Mode
Globalconfiguration:XSR(config)#
Next Mode
FRMap‐Classconfiguration:XSR(config-map-class)#
Example
Thisexampledefinesframerelaymap‐classnormlink:
XSR(config)#map-class frame-relay normlink
XSR(config-map-class<normlink>)#frame-relay adaptive-shaping
XSR(config-map-class<normlink>)#frame-relay cir out 64000
XSR(config-map-class<normlink>)#frame-relay bc out 8000
XSR(config-map-class<normlink>)#frame-relay be out 8000
XSR(config-map-class<normlink>)#service-policy output HighPriority
service-policy
Thiscommandsetstheservice‐policyprofilefortheclassmap.Theservice‐policyisaflexible
methodtoconfigureQoSforaninterface,sub‐interfaceandDLCI,Youcanuseittocreatepriority
queues,customqueues,WFQorFIFOqueues.Referto“ConfiguringQualityofService”on
page 83for
moredetails.
Syntax
service-policy {out} service-policy-name
Syntax of the “no” Form
Thenoformofthiscommanddisablesaservice‐policy:
no service-policy output service-policy-name
Mode
MapClassconfiguration:XSR(config-map-class)#
dialer
Setsadialermapclass.Formoreinformation,referto“Configuringthe
DialerInterface”onpage 83.
map-class-name
NameofthemapclasstoassociatewiththisDLCI,upto29characters.
out
Servicepolicyappliestooutgoingtrafficonly.
service-policy-
name
Nameoftheseparatedconfiguredservice‐policyprofiletoapplyfor
thismap‐class.