Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

Tunnel Clear and Show Commands

14-132 Configuring the VPN

Tunnel Clear and Show Commands

clear tunnel

Thiscommandterminatesanon‐GREtunnelassociatedwithauserortunnelID.Tunnelswillre‐

establishthemselvesifsettodosounlesstheuserisdisabledinitsdatabase.Forexample,a

clearedIPSectunnelwillre‐establishiftrafficisinitiated.

L2TPandPPTPtunnelswillbe

disconnectedontheserverside.Theclientsideofthetunnelwill

timeoutafteritsdesignatedtimeoutperiod.

Syntax

clear tunnel <user-ID | <tunnel-ID>

Mode

PrivilegedEXEC:XSR#

Example

Thefollowingexampleterminatestunnel40000001:

XSR#clear tunnel 40000001

show tunnels

ThiscommandlistsalltunnelscurrentlyconnectedtotheXSR.

Syntax

show tunnels <user-ID | tunnel-ID>

Mode

PrivilegedEXEC: XSR#

Sample Output

ThefollowingissampleoutputqueriedbythexsrclientUser‐ID:

XSR#show tunnels xsrclient

Note: This command terminates all but GRE and GRE/IPSec tunnels with an error message

displayed if you attempt to do so. To bring down a GRE tunnel, remove its interface or use the no

set active command.

user-ID

NameoftheVPNuser.

tunnel-ID

Identificationnumberassociatedwiththistunnel.

user-ID

NameoftheVPNuser.

tunnel-ID

Identificationnumberassociatedwiththistunnel.

previous next