Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

DHCP Commands

15-86 Configuring DHCP

Example

Thefollowingexamplespecifies theclientidentifierforMACaddress00.01f4.0127.10indotted

hexadecimalnotation:

XSR(config-dhcp)#client-identifier 0100.01f4.0127.10

Thefollowingexamplespecifies theclientidentifierforMACaddress0001.f401.2710indotted

hexadecimalnotation,forthehostwithIPaddress10.10.10.20:

XSR(config-dhcp-pool)#host 10.10.10.20 255.255.255.0

XSR(config-dhcp-host)#client-identifier 0100.01f4.0127.10

Thefollowingexamplespecifies theclientidentifierforMACaddress00.01f4.0127.10indotted

hexadecimalnotation,andaddsittoclasseng:

XSR(config-dhcp-pool)#client-class eng

XSR(config-dhcp-class)#client-identifier 0100.01f4.0127.10

client-name

ThiscommandspecifiesthenameofaDHCPclient.Theclientnameshouldnotincludethe

domainname.ThecommandisavailablefromDHCPhostmodeonly.

Syntax

client-name name

Syntax of the “no” Form

Usethenoformofthiscommandtoremovetheclientname:

no client-name name

Mode

DHCPhostconfigurationonly:XSR(config-dhcp-host)#

Example

Thefollowingexamplespecifies astringsoho1thatwillbethenameoftheclientwithMAC

address1111.2222.3333:

XSR(config-dhcp-pool)#hardware-address 1111.2222.3333

XSR(config-dhcp-host)#client-name soho1

name Designation of the client, defined using any set of standard ASCII characters. The client

name should not include the domain name. For example, the name soho should not be

specified as soho.enterasys.com.

previous next