ISDN Commands
Book Title goes here 11-85
Syntax of the “no” Form
Usethenoformofthiscommandtoremovetheverificationrequest:
no isdn answer1 [called-party-number][:subaddress]
Default
Noverificationofeithernumber
Mode
BRIInterfaceconfiguration:XSR(config-if<BRI-xx>)#
Examples
ThefollowingexampleconfiguresBRIinterface1/1withcalled‐partyandsub‐addressnumbers:
XSR(config)#interface bri 1/1
XSR(config-if<BRsaI-1/1>)#isdn answer1 6171234:5678
ThefollowingexampleconfiguresBRIinterface2/0withasub‐addressnumberonly:
XSR(config)#interface bri 2/0
XSR(config-if<BRI-2/0>)#isdn answer1:5678
isdn bchan-number-order (PRI)
ThiscommandconfiguresanISDNPRIinterfacetochooseanoutgoingcallineitherascendingor
descendingorder.TheXSRselectsthelowestorhighestavailableB‐channelstartingateither
channelB1(ascending)orchannelB23foraT1anD‐channelB30foranE1(descending).Usethis
commandonly
ifyourserviceproviderrequestsittodecreasetheprobabilityofcallcollisions.
Syntax
isdn bchan-number-order {ascending | descending}
Syntax of the “no” Form
Torestorethedefault,usethenoformorsimplyreconfiguretheinterfacewiththenewvalue:
no isdn bchan-number-order
Default
Descending
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
ascending
SelectstheoutgoingB‐channelinascendingorderasfollows:1to24for
aT1and1to31foranE1card.
descending
SelectstheoutgoingB‐channelindescendingorderasfollows:24to1
foraT1and31to1foranE1card.