Filter
Top Products
QoS Show Commands
12-112 Configuring Quality of Service
Sample Output
Thisfollowingcommandsconfigureshapeinformationforeachclass.Inthefollowingexample
policy‐mapshapeisconfiguredasfollows:
XSR(config)#policy-map Shape
XSR(config-pmap<Shape>)#class d32
XSR(config-pmap-c<d32>)#bandwidth per 30
XSR(config-pmap-c<d32>)#shape 400000 50000
XSR(config-pmap-c<d32>)#class d33
XSR(config-pmap-c<d33>)#bandwidth per 30
XSR(config-pmap-c<d32>)#shape 100000 12500
Thefollowingissampleoutputdisplaysshapeinformationforclassesd32andd33:
XSR# show shape interface serial 1/0:0
Serial 0/1/0:0
output: Shape
Serial 0/1/1:1
output: Shape
Class d32
Traffic shaping
Average Normal Exceed Refresh Refresh
Rate Burst Burst Time Bytes
400000 50000 0 10(ms) 500
Class d33
Traffic shaping
Average Normal Exceed Refresh Refresh
Rate Burst Burst Time Bytes
100000 12500 0 10(ms) 125
Parameter Descriptions
Average Rate
Averageshapedrateconfigured.
Normal burst
Configurednormalburst.
Exceed burst
Configuredexceedburst.
Refresh time
Timeintervalofbucketrefillwithtokens.
Refresh bytes
Numberofbytesaddedtothe bucketpertimeinterval.