Filter
Top Products
snmp-server Commands
XSR CLI Reference Guide 1-19
Syntax of the “no” Form
Thenoformofthiscommandoffersnocontactinformation:
no snmp-server contact
Mode
Globalconfiguration:XSR(config)#
Default
Nullstring
Example
XSR(config)#snmp-server contact LarryCurtis@enterasys.com
XSR(config)#snmp-server contact “Larry Curtis 508 767-2536”
snmp-server enable/disable
ThiscommandenablesordisablestheSNMPserver.Iftheserverisdisabled,usinganysnmpCLI
commandwillturnitbackon.
Syntax
snmp-server {enable | disable}
Mode
Globalconfiguration:XSR(config)#
Default
Disable
snmp-server enable traps
Thiscommandenablestrapsandinformstobesent.SNMPv1trapsandv3informsaresupported,
Theyaresenttothehostsconfiguredwiththe
snmp-server host command.
Syntax
snmp-server enable traps [[snmp [authentication]] entity | frame-relay | bgp |
ospf]
enable
EnablestheSNMPserver.
disable
DisablestheSNMPserver.
snmp
EnablesallSNMPtraps.
authentication
Enablesauthenticati ontrapsonly.
entity
Enablesallentitytraps.
frame-relay
EnablesallFrameRelaytraps.
bgp
EnablesallBGPtraps.
ospf
EnablesallOSPFtraps.