Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

AAA Method Commands

XSR CLI Reference Guide 16-101

privilege

Thiscommandconfigurestheprivilegelevelofauser.ItisavailablefrombothAAAUserand

AAAGroupconfigurationmodes.ComparethiscommandwiththeInterfacemode

privilege

commandonpage111.

Syntax

privilege level (0-15)

Syntax of the No Form

Usethenoformofthiscommandtorestoretheprivilegeleveldefault:

no privilege

Default

0

Mode

AAAUser/Groupconfiguration:XSR(aaa-user)# or XSR(aaa-group)#

Example

Thefollowingexamplespecifies aprivilegelevelof15foruserkramer:

XSR(config)#aaa user kramer

XSR(aaa-user)#privilege 15

AAA Method Commands

aaa method

ThiscommandisexecutedattheGlobalMode.

ThiscommandconfigurestheAAAmethod(plug‐in)tobe used.Thefollowingsub‐commands

areavailableinAAAMethodmode:

•

acct-port - SetstheUDPportforaccountingrequests.Refertopage16‐103forthe

commanddefinition.

•

address - SpecifiestheRADIUSserveraddresswitheitherahostnameorIPaddress.Refer

topage16‐103forthecommanddefinition.

•

attempts - SetsthenumberofconsecutiveloginattemptsthatmustfailbeforetheRADIUS

methodʹsbackupmethodisused.Refertopage16‐104forthecommanddefinition.

•

auth-port - SpecifiestheUDPportforauthenticationrequests.Refertopage16‐104forthe

commanddefinition.

•

backup‐SpecifiesanameforabackupRADIUSmethodname.Refertopage16‐105forthe

commanddefinition.

level

Specifiestheprivilegelevel(0‐15)associatedwiththisuser.

previous next