Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

Dialer Interface Clear and Show Commands

10-90 Configuring the Dialer Interface

Syntax of the “no” Form

Thenoformofthiscommandremovesthemodem‐init‐string:

no modem-init-string

Mode

Map‐ClassDialerconfiguration:XSR(config-map-class<xx>)#

Example

Thefollowingexamplespecifiesamodeminitializationstringtodisabledialtonedetectionforthe

MapClassRemote:

XSR(config-map-class<Remote>)#modem-init-string ATX3

Dialer Interface Clear and Show Commands

clear dialer

Thiscommandclearsdialerstatisticsforphysicalinterfacesconnectedtothedialerinterfaces.If

theinterfaceisnotspecified,allinterface(forthedialer)statisticswillbecleared.

Syntax

clear dialer

Mode

PrivilegedEXEC:XSR#

Example

XSR#clear dialer

show dialer

Thiscommanddisplaysgeneralinformationandsomeconfigurationsofinterfacesconfigured

underthedialer;forinstance,thedialerinterfacesandtheserialandasyncinterfacesunderthe

dialerinterfaces.

Syntax

show dialer [number]

Mode

PrivilegedEXEC:XSR#

number Interface number.

previous next