Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

Other ADSL Commands

13-90 Configuring ADSL

Defaults

• Backup:Disabled

• VPN:Disabled

• Description:Settotheemptystring

• Encapsulation:None

• IP:Notconfigured

• PPP:Notconfigured

• OAMprocedures:Disabled

• ATMPVCVPI/VCI:Setto1/32

•Thesub‐interfacewillbeintheshutdownstate

Example

ThefollowingexamplecreatesanATMsub‐interfaceobjectonATMinterfaceslot0,card1,port1:

XSR(config)#interface atm 0/1/1.1 point-to-point

XSR(config-if<ATM0/1/1.1>)#

backup

ThiscommandconfiguresandenablesabackupinterfaceforthisATMsub‐interface.This

commandrequiresaproperlyconfiguredATMsub‐interfaceandDialergroup.

Syntax

backup {delay down-wait {up-wait | never} | interface dialer id | time-range

begin-hh:mm end-hh:mm}

Syntax of the “no” Form

ThenoformofthiscommanddisablesabackupforthisATMsub‐interface:

no backup {delay | interface | time-range}

Mode

ATMSub‐Interfaceconfiguration:XSR(config-if<ATMx/x/x.x>)#

down-wait

Secondstowaitbeforeswitchingtothebackupinterface.

up-wait |

never

SecondstowaitbeforeswitchingbacktoATMinterface.Ifsettonever,it

willremainonthebackupinterface.

id

DialertouseforbackupwhenATMinterfaceisdown.

begin-hh:mm

TimeofdaytoswitchtothebackuplineregardlessofATMinterfacestate.

end-hh:mm

Timeofdaytoreverttonormalinterfacebackupprocedures.

previous next