Filter
Top Products
Other ADSL Commands
13-92 Configuring ADSL
XSR(config-if<ATM0/1/0.1>)#crypto ezipsec
XSR(config-if<ATM0/1/0.1>)#crypto ipsec df-bit copy
XSR(config-if<ATM0/1/0.1>)#crypto map ets-vpn
description
ThiscommandaddsadescriptionstringtoanexistingATMsub‐interface.Thiscommand
requiresaproperlyconfiguredATMsub‐interface.
Syntax
description description_text
Syntax of the “no” Form
Thenoformofthiscommandsetsthedescriptiontexttoanempty string:
no description
Mode
ATMSub‐Interfaceconfiguration:XSR(config-if<ATMxx.x>)#
Example
ThefollowingexampleaddstheADSLVC1/32textstringtothesub‐interfaceobject:
XSR(config-if<ATM0/1/0.1>)#description “ADSL VC 1/32”
encapsulation
ThiscommandselectsthedataencapsulationmethodforthisATMsub‐interface.Beawarethatan
encapsulationmethodmustbeselectedbeforethesub‐interfacecanpassdata.
Syntax
encapsulation {mux | snap}{ipoa | pppoa | pppoe} [service-name]
description
_text
Astringdescribingthesub‐interfaceobject.Textwithembeddedspacesmust
beenclosedindoublequotes.Omittingtextcausesanemptystring.
Note: This command requires a properly configured ATM sub-interface. In order to change
encapsulation, you must issue the no encapsulation command first before restting the value.
mux
VCmultiplexing(perRFC‐2684/1483).
snap
LLC/SNAPmultiplexing(perRFC‐2684/1483).
ipoa
IPencapsulatedtrafficflowsonthisVC(perRFC‐2684).
pppoa
PPPencapsulatedtrafficflowsonthisVC(perRFC‐2364).
pppoe
PPPoverEthernetencapsulatedtrafficflowsonthisVC(perRFC‐2516).