Filter
Top Products
Multilink PPP Commands
XSR CLI Reference Guide 8-117
ppp multilink fragment disable
ThiscommanddisablesfragmentationoverabundlePPPconnection,supportingMultilinkand
Dialerinterfaces.
Syntax
ppp multilink fragment disable
Syntax of the “no” Form
Thenoformofthiscommandenablesfragmentation(defaultmode):
no ppp multilink fragment disable
Mode
Interfaceconfiguration:XSR(config-if<xx>)#
Default
Enabled
Examples
ThefollowingexampledisablesfragmentationoverMultilinkinterface1:
XSR(config-if<M1>)#ppp multilink fragment disable
Display Examples
Thefollowingexamplesdisplayfragmentationsettingsbytheshow interface multilink
command:
XSR#show interface multilink 1
********** Multilink Interface Stats **********
Multilink 1 is Admin Up
Internet address is 30.30.30.2, subnet mask is 255.255.255.0
LCP State: OPENED
IPCP State: OPENED
Multilink State: OPENED
Multi-Class State: OPENED
Multilink header format is LONG SEQ NUM
Class suspendable level is 5 tx classes and 5 rcv classes
Fragmentation is disabled
……
Thefollowingexampledisplaysfragmentationsettingsbytheshow ppp interface multilink
command:
XSR#show ppp interface multilink 1
********** MLPPP Bundle Stats **********
Multilink 1: MLPPP is Admin Up / Oper Up