Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

AAA Debug and Show Commands

16-112 Configuring Security

Syntax of the “no” Form

Thenoformofthiscommandremovestheuser/group/interfacerestriction:

no aaa privilege

Mode

Interfaceconfiguration:XSR(config-if<xx>#

Default

Privilege level: 15'

Example

Thisexampleresetstheprivilegelevelto10onGigabitEthernetinterface2:

XSR(config-if<G2>)#aaa privilege 10

AAA Debug and Show Commands

debug aaa

Thiscommandactivates/deactivatestheoutputofAAAdebuggingdata,whichisclassifiedby

Authentication,AccountingandAuthorizationcategories.

Thecommand’soutputwillbesenttotheterminalthatmostrecentlyrequesteddebug

information.Also,ifmultipleAAAdebugmessagesareacti vated,alldebugdatawillbesentto

theterminalfrom

whichitwasmostrecentlyactivated.

Syntax

debug aaa {accounting | authentication | authorization}

Syntax of the “no” Form

Thenoformofthiscommandresetstothedefaultvalue:

no debug aaa {accounting | authentication | authorization}

Mode

PrivilegedEXEC:XSR#

Sample Output

ThedebugauthorizationmessagebelowindicatestheLocalmethodwassuccessfulwithMSCHAP:

Local::queue(test)

accounting

Accountingdebugdatadisplayed.

authentication

Authenticationdebugdatadisplayed.

authorization

Authorizationdebugdatadisplayed.

previous next