Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

OSPF Debug and Show Commands

XSR CLI Reference Guide 5-105

Syntax of the “no” Form

Thenoformofthiscommandreturnsthedebugfunctiontothedefault:

no debug ip ospf packet

Mode

EXECconfiguration:XSR>

Examples

ThefollowingexampledisplaysatransmittedHellopacket:

OSPF: Tx PKT. Hello v:2 t:1 l:44 rid:1.1.1.4 aid:0.0.0.5 chk:fa94 aut:0000 from

GigabitEthernet 2 to 224.0.0.5

ThefollowingexampledisplaysareceivedHellopacketthatfailedverificationbecausetheareaID

doesnotmatch:

OSPF: Rx PKT. Hello v:2 t:1 l:44 rid:10.0.0.1 aid:0.0.0.3 chk:e9a2 aut:0000 from

GigabitEthernet 2 is NOk

ThefollowingexampledisplaysareceivedHellopacketthatpassedverification:

OSPF: Rx PKT. Hello v:2 t:1 l:48 rid:10.0.0.1 aid:0.0.0.5 chk:8846 aut:0000 from

GigabitEthernet 2 is Ok

Thefollowingexampledisplaysareceiveddatabasedescriptionpacket:

OSPF: Tx PKT. Database v:2 t:2 l:172 rid:1.1.1.4 aid:0.0.0.5 chk:7204 aut:0000

from GigabitEthernet 2 to 53.53.53.21

Thefollowingexampledisplaysatransmittedlinkstaterequestpacket:

OSPF: Tx PKT. LS request v:2 t:3 l:228 rid:1.1.1.4 aid:0.0.0.5 chk:99d5 aut:0000

from GigabitEthernet 2 to 53.53.53.21

Thefollowingexampledisplaysareceivedlinkstateupdatepacket:

OSPF: Rx PKT. LS update v:2 t:4 l:96 rid:10.0.0.1 aid:0.0.0.4 chk:7214 aut:0000

from GigabitEthernet 2.2 is Ok

Thefollowingexampledisplaysatransmittedlinkstateacknowledgepacket:

OSPF: Tx PKT. LS Ack v:2 t:5 l:44 rid:1.1.1.4 aid:0.0.0.5 chk:b63d aut:0000 from

GigabitEthernet 2 to 53.53.53.21

Parameter Descriptions

TxPKT OSPFPackettransmitted.

Hello OSPFHelloPacket.

v:2 OSPFVersion.

t:1 OSPFPacketType.

l:44 OSPFPacketlength.

rid:1.1.1.4 OSPFRouterID.

aid:0.0.0.5 OSPFAreaID.

chk:fa94 OSPFPacketChecksum.

aut:0000 Authentication.

fromGigabitEthernet2 Outgoinginterface.

to224.0.0.5 DestinationIPaddress.

previous next