Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

IGMP Clear and Show Commands

7-100 Configuring IP Multicast

Example

Thefollowingexampledisplayssampleresponses:

XSR>#show ip pim bsr

PIMv2 Bootstrap information

This system is the Elected Bootstrap Router (BSR)

BSR address: 192.168.27.1

Uptime: 04:37:46, BSR Priority: 4, Hash mask length: 30

Next bootstrap message in 00:00:03 seconds

This system is the Candidate Bootstrap Router (CBSR)

Candidate BSR Address: 50.0.0.30 Priority: 0, Hash Mask Length: 30

Parameters in the Response

show ip pim interface

ThiscommanddisplaysdataaboutinterfacessetforProtocolIndependentMulticast(PIM).

Syntax

show ip pim interface [type number]

Mode

EXECconfiguration:XSR>

Example

Thefollowingexampledisplaysampleresponses:

XSR>show ip pim interface

PIM Interface Table

Address Interface Nbr Count Hello Intvl DR

30.0.0.20 FastEthernet1 0 30 30.0.0.20

40.0.0.20 FastEthernet2 2 30 40.0.0.40

BSRaddress IPaddressofthebootstraprouter.

Uptime IntervalthatthisXSRhasbeenup,inhours:minutes:seconds.

BSRPriority Priorityassetbythe

ip pim bsr-candidatecommand.

Hashmasklength Lengthofamask(32bitsmaximum)thatistobeANDedwiththe

groupaddressbeforethehashfunctioniscalled.Thisvalueis

configuredbythe

ip pim bsr-candidatecommand.

Nextbootstrapmessagein Period(inhours:minutes:seconds)inwhichthenextbootstrap

messageisduefromthisBSR.

type

Interfacetype.

number

Interfacenumber.

previous next