©
National Instruments Corporation xix NI-DAQ FRM for PC Compatibles
About This Manual
About the National Instruments Documentation Set
The NI-DAQ Function Reference Manual for PC Compatibles is one piece
of the documentation set for your DAQ system. You might have any of
several types of manuals, depending on the hardware and software in your
system. Use these manuals as follows:
• Your SCXI hardware user manuals—If you are using SCXI, read these
manuals next for detailed information about signal connections and
module configuration. They also explain in greater detail how the
module works and contain application hints.
• Your DAQ hardware user manuals—These manuals have detailed
information about the DAQ hardware that plugs into or is connected
to your computer. Use these manuals for hardware installation and
configuration instructions, specification information about your DAQ
hardware, and application hints.
• Software documentation—Examples of software documentation you
might have are the ComponentWorks, LabVIEW and
LabWindows/CVI, VirtualBench, and NI-DAQ documentation. After
you have set up your hardware system, use either the application
software or the NI-DAQ documents to help you write your application.
If you have a large and complicated system, it is worthwhile to look
through the software manuals before you configure your hardware.
• Accessory installation guides or manuals—If you are using accessory
products, read the terminal block and cable assembly installation
guides or accessory board user manuals. They explain how to
physically connect the relevant pieces of the system. Consult these
guides when you are making your connections.
• SCXI Chassis User Manual—If you are using SCXI, read this manual
for maintenance information on the chassis and installation
instructions.