Chapter 1 Using the NI-DAQ Functions
NI-DAQ FRM for PC Compatibles 1-6
©
National Instruments Corporation
Table 1-3 shows how the LabWindows/CVI function panel tree is
organized, and the NI-DAQ function name that corresponds to each
function panel.
Table 1-3.
The LabWindows/CVI Function Tree for Data Acquisition
LabWindows/CVI Function Panel NI-DAQ Function
Data Acquisition
Initialization/Utilities
Initialize Board
Init_DA_Brds
Configure Timeout
Timeout_Config
Get Device Information
Get_DAQ_Device_Info
Set Device Information
Set_DAQ_Device_Info
Align DMA Buffer
Align_DMA_Buffer
Get DAQ Library Version
Get_NI_DAQ_Version
Select E-Series Signals
Select_Signal
Config Analog Trigger
Configure_HW_Analog_Trigger
Change Line Attribute
Line_Change_Attribute
Board Config & Calibrate
Configure MIO Boards
MIO_Config
Configure AMUX Boards
AI_Mux_Config
Configure SC-2040
SC_2040_Config
Calibrate MIO Boards
MIO_Calibrate
Calibrate E Series
Calibrate_E_Series
Calibrate LPM-16
LPM16_Calibrate
Calibrate Analog Output
AO_Calibrate
Calibrate 1200 Devices
Calibrate_1200
Calibrate DSA Devices
Calibrate_DSA