Filter
Top Products
Appendix A Status Codes
NI-DAQ FRM for PC Compatibles A-12
©
National Instruments Corporation
–10448 stackMemError The driver is unable to continue parsing
a string input due to stack limitations.
–10449 cacheMemError A cache-related error occurred, or
caching is not supported in the current
mode.
–10450 physicalMemError A hardware error occurred in physical
memory, or no memory is located at the
specified address.
–10451 virtualMemError The driver is unable to make the transfer
buffer contiguous in virtual memory and
therefore cannot lock it into physical
memory; thus, the buffer cannot be used
for DMA transfers.
–10452 noIntAvailError No interrupt level is available for use.
–10453 intInUseError The specified interrupt level is already
in use by another device.
–10454 noDMACError No DMA controller is available in the
system.
–10455 noDMAAvailError No DMA channel is available for use.
–10456 DMAInUseError The specified DMA channel is already
in use by another device.
–10457 badDMAGroupError DMA cannot be configured for the
specified group because it is too small,
too large, or misaligned. Consult the
device user manual to determine group
ramifications with respect to DMA.
–10458 diskFullError A disk overflow occurred while
attempting to write to a file.
–10459 DLLInterfaceError The DLL could not be called because
of an interface error.
Table A-1.
Status Code Summary (Continued)
Status Code Status Name Description