Filter
Top Products
Index
©
National Instruments Corporation I-5 NI-DAQ FRM for PC Compatibles
counting and time measurement applications.
See also buffered counting and time
measurement.
event counting application,
2-217 to 2-218
signals on two separate gates,
2-225 to 2-227
single period measurement,
2-218 to 2-220
single pulse width measurement,
2-220 to 2-223
triggered pulse width measurement,
2-223 to 2-225
customer communication, xx, D-1 to D-2
D
DAQArb 5411 device settings. See
AO_Change_Parameter function.
DAQ_Check function, 2-115 to 2-116
DAQ_Clear function, 2-117
DAQ_Config function, 2-118 to 2-120
DAQ_DB_Config function, 2-121
DAQ_DB_HalfReady function,
2-122 to 2-123
DAQ_DB_Transfer function, 2-124 to 2-125
DAQ_Monitor function, 2-126 to 2-128
DAQ_Op function, 2-129 to 2-131
DAQ_Rate function, 2-132 to 2-133
DAQ_Set_Clock function, 2-134 to 2-135
DAQ_Start function, 2-136 to 2-139
DAQ-STC counter functions. See counter/
timer functions.
DAQ_StopTrigger_Config function,
2-140 to 2-141
DAQ_to_Disk function, 2-142 to 2-144
DAQ_VScale function, 2-145 to 2-146
data acquisition functions
Configure_HW_Analog_Trigger,
2-83 to 2-89
DAQ_Check, 2-115 to 2-116
DAQ_Clear, 2-117
DAQ_Config, 2-118 to 2-120
DAQ_DB_Config, 2-121
DAQ_DB_HalfReady, 2-122 to 2-123
DAQ_DB_Transfer, 2-124 to 2-125
DAQ_Monitor, 2-126 to 2-128
DAQ_Op, 2-129 to 2-131
DAQ_Rate, 2-132 to 2-133
DAQ_Set_Clock, 2-134 to 2-135
DAQ_Start, 2-136 to 2-139
DAQ_StopTrigger_Config,
2-140 to 2-141
DAQ_to_Disk, 2-142 to 2-144
DAQ_VScale, 2-145 to 2-146
Lab_ISCAN_Check, 2-263 to 2-265
Lab_ISCAN_Op, 2-266 to 2-269
Lab_ISCAN_Start, 2-270 to 2-273
Lab_ISCAN_to_Disk, 2-274 to 2-276
Line_Change Attribute, 2-277 to 2-278
NI-DAQ function support (table)
DSA devices, C-9
Lab/516/DAQCard-500/700 devices,
C-6 to C-7
MIO and AI devices, C-3
SCAN_Demux, 2-294 to 2-295
SCAN_Op, 2-296 to 2-299
SCAN_Sequence_Retrieve, 2-303
SCAN_Sequence_Setup, 2-304 to 2-306
SCAN_Setup, 2-307 to 2-308
SCAN_Start, 2-309 to 2-314
SCAN_to_Disk, 2-315 to 2-318
Select_Signal, 2-372 to 2-388
data types. See variable data types.
demultiplexing functions
SCAN_Demux, 2-294 to 2-295
SCAN_Sequence_Demux,
2-300 to 2-302
device numbers, 1-1 to 1-2, 2-255 to 2-257
digital filter, 2-31
digital I/O functions
block transfer, group mode
DIG_Block_Check, 2-147