Filter
Top Products
Chapter 2 Function Reference — SCXI_AO_Write
©
National Instruments Corporation 2-321 NI-DAQ FRM for PC Compatibles
The SCXI-1124 is shipped with a set of factory calibration constants in the factory-set
EEPROM area and a copy of the factory constants in the EEPROM load area. You can
recalibrate your module and store your own calibration constants in the EEPROM load area
using the
SCXI_Cal_Constants function. Refer to the SCXI_Cal_Constants function
description for calibration procedures and information about the module EEPROM.
If you want to write a binary value directly to the output channel, use opCode = 1.
SCXI_AO_Write will not use the calibration constants or the conversion formula; it will
simply write your binaryData value to the DAC.