Filter
Top Products
Chapter 1 Using the NI-DAQ Functions
©
National Instruments Corporation 1-9 NI-DAQ FRM for PC Compatibles
Waveform Generation
Generate WFM from Array
WFM_Op
Generate WFM from Disk
WFM_from_Disk
Low-Level Functions
Scale Waveform Buffer
WFM_Scale
Convert Waveform Rate
WFM_Rate
Assign Waveform Group
WFM_Group_Setup
Load Waveform Buffer
WFM_Load
Assign Rate to WFM Group
WFM_ClockRate, WFM_Set_Clock
Control Waveform Group
WFM_Group_Control
Pause/Resume WFM Channel
WFM_Chan_Control
Check Waveform Channel
WFM_Check
Enable Double Buffering
WFM_DB_Config
Is Half Buffer Ready?
WFM_DB_HalfReady
Copy Array to WFM Buffer
WFM_DB_Transfer
Digital Input/Output
Configure Port
DIG_Prt_Config
Configure Line
DIG_Line_Config
Read Port
DIG_In_Port
Read Line
DIG_In_Line
Write Port
DIG_Out_Port
Write Line
DIG_Out_Line
Get Port Status
DIG_Prt_Status
Configure Trigger
DIG_Trigger_Config
Table 1-3.
The LabWindows/CVI Function Tree for Data Acquisition (Continued)
LabWindows/CVI Function Panel NI-DAQ Function