Filter
Top Products
Index
NI-DAQ FRM for PC Compatibles I-10
©
National Instruments Corporation
N
NI-DAQ constants include file, Microsoft
Visual Basic for Windows, 1-5
O
offset and gain adjustment
gain adjustment measurement, B-7
offset measurement, B-7
output attenuation, 2-33
output enable setting, 2-32
output impedance, 2-32
overflow detection, 2-95
P
page boundaries, 2-23 to 2-24
PCI-MITE DMA transfers
enabling/disabling interrupts, 2-36
memory transfer width, 2-37
period measurement applications
buffered period measurement,
2-237 to 2-239
buffered semi-period measurement,
2-239 to 2-240
single period measurement,
2-218 to 2-220
phase locking of internal timebases, 2-35
PLL reference frequency, 2-35
Port 0 digital I/O lines reserved (table), 2-11
programming language considerations,
1-4 to 1-5
pulse generation applications
frequency shift keying, 2-234 to 2-235
retriggerable, 2-231 to 2-232
single pulse, 2-227 to 2-229
triggered, 2-229 to 2-231
pulse generation timing considerations,
2-102 to 2-103
pulse generation timing (figure), 2-102
pulse timing for pulseWidth=0 (figure),
2-103
pulse train generation application,
2-232 to 2-234
pulse width measurement applications
buffered pulse width, 2-240 to 2-241
signals on two separate gates,
2-225 to 2-227
single pulse width, 2-220 to 2-223
single triggered pulse width
measurement, 2-223 to 2-225
R
reglitching, 2-28
retriggerable pulse generation application,
2-231 to 2-232
RTSI bus functions
definition, 1-14
LabWindows function panel tree, 1-12
NI-DAQ function support (table)
AT-AO-6/10, C-11
AT-DIO-32F and DAQDIO 6533,
C-13 to C-14
MIO and AI devices, C-4
RTSI_Clear, 2-286
RTSI_Clock, 2-287 to 2-288
RTSI_Conn, 2-289 to 2-290
rules for RTSI bus connections, 2-290
RTSI_DisConn, 2-291
RTSI bus line and VXIbus trigger mapping
(table), 2-387 to 2-388
S
SC_2040_Config function, 2-292 to 2-293
SCAN_Demux function, 2-294 to 2-295
SCAN_Op function, 2-296 to 2-299
SCAN_Sequence_Demux function,
2-300 to 2-302
SCAN_Sequence_Retrieve function, 2-303