Filter
Top Products
Chapter 2 Function Reference — SCXI_Reset
©
National Instruments Corporation 2-351 NI-DAQ FRM for PC Compatibles
• SCXI-1163:
Initializes all of the digital output lines on the module to a logical high state.
• SCXI-1163R:
Initializes all of the solid state relays to their open states.
• SCXI-1200:
Sets channel 0 to read from the front panel 50-pin connector and not the SCXIbus.
Use
Init_DA_Brds to completely initialize the hardware and software state of the
SCXI-1200.
• SCXI-2400:
Reboots the module. It will take a few seconds for this call to return because it waits
for the module to finish booting and attempts to reestablish communication with the
module.