National Instruments 321645c-01 Welding System User Manual


 
Index
NI-DAQ FRM for PC Compatibles I-4
©
National Instruments Corporation
DIG_Trigger_Config, 2-192 to 2-194
GPCTR_Config_Buffer, 2-209 to 2-210
ICTR_Setup, 2-251 to 2-254
LabWindows function panel tree, 1-6
MIO_Config, 2-284 to 2-285
SC_2040_Config function,
2-292 to 2-293
SCXI_Configure_Filter, 2-333 to 2-335
SCXI_Get_Chassis_Info, 2-336 to 2-337
SCXI_Get_Module_Info, 2-338 to 2-339
SCXI_Load_Config, 2-344
SCXI_MuxCtr_Setup, 2-347 to 2-348
SCXI_SCAN_Setup, 2-355 to 2-356
SCXI_Set_Config, 2-357 to 2-359
SCXI_Single_Chan_Setup, 2-366
SCXI_Track_Hold_Setup,
2-368 to 2-371
Timeout_Config, 2-400 to 2-401
WFM_DB_Config, 2-411 to 2-412
WFM_Group_Setup, 2-423 to 2-424
Configure_HW_Analog_Trigger function,
2-83 to 2-89
description, 2-83 to 2-87
ND_ABOVE_HIGH_LEVEL (figure),
2-85
ND_BELOW_LOW_LEVEL (figure),
2-85
ND_HIGH_HYSTERESIS (figure), 2-86
ND_INSIDE_REGION (figure), 2-85
ND_LOW_HYSTERESIS (figure), 2-86
using the function, 2-87 to 2-89
continuous trigger mode, for DAQArb 5411
devices, 2-34
counter/timer functions
8253 counters (ICTR)
ICTR_Read, 2-248 to 2-249
ICTR_Reset, 2-250
ICTR_Setup, 2-251 to 2-254
LabWindows function panel tree,
1-11 to 1-12
Am9513 counters (CTR)
CTR_Config function, 2-90 to 2-91
CTR_EvCount function,
2-92 to 2-93
CTR_EvRead function, 2-94 to 2-95
CTR_FOUT_Config, 2-96 to 2-97
CTR_Period function, 2-98 to 2-99
CTR_Pulse function, 2-100 to 2-103
CTR_Rate, 2-104 to 2-105
CTR_Reset, 2-106
CTR_Restart, 2-107
CTR_Simul_Op, 2-108 to 2-109
CTR_Square, 2-110 to 2-112
CTR_State, 2-113
CTR_Stop function, 2-114
LabWindows function panel tree,
1-11 to 1-12
DAQ-STC counters (GPCTR)
GPCTR_Change_Parameter,
2-198 to 2-208
GPCTR_Config_Buffer,
2-209 to 2-210
GPCTR_Control, 2-211 to 2-212
GPCTR_Read_Buffer,
2-213 to 2-214
GPCTR_Set_Application,
2-215 to 2-244
GPCTR_Watch, 2-245 to 2-247
LabWindows function panel tree,
1-11
definition, 1-14
LabWindows function panel tree,
1-11 to 1-12
NI-DAQ function support (table)
DSA devices, C-9 to C-10
Lab/516/DAQCard-500/700 devices,
C-7
MIO and AI devices, C-2 to C-3, C-4
PC-TIO-10 and 6602 devices,
C-14 to C-15