Filter
Top Products
Index
NI-DAQ FRM for PC Compatibles I-12
©
National Instruments Corporation
ND_IN_SCAN_START signal
definition (table), 2-374
purpose and use, 2-376 to 2-377
ND_IN_START_TRIGGER signal
definition (table), 2-374
purpose and use, 2-375
ND_IN_STOP_TRIGGER signal
definition (table), 2-374
purpose and use, 2-376
ND_OUT_EXTERNAL_GATE signal
definition (table), 2-374
purpose and use, 2-379 to 2-380
ND_OUT_START_TRIGGER signal
definition (table), 2-374
purpose and use, 2-378 to 2-379
ND_OUT_UPDATE signal
definition (table), 2-374
purpose and use, 2-379
ND_OUT_UPDATE_CLOCK_TIMEBA
SE signal
definition (table), 2-374
purpose and use, 2-380
ND_PFI_0 through ND_PFI_9 signals
definition (table), 2-374
purpose and use, 2-380 to 2-381
ND_PLL_REF_SOURCE signal
definition (table), 2-374
purpose and use, 2-384
ND_RTSI_0 through ND_RTSI_6 signals
definition (table), 2-375
purpose and use, 2-382 to 2-383
ND_RTSI_CLOCK signal
definition (table), 2-375
purpose and use, 2-383 to 2-384
RTSI bus line and VXIbus trigger
mapping (table), 2-387 to 2-388
special considerations when source =
ND_CONVERT, 2-384
using the function, 2-386
Set_DAQ_Device_Info function,
2-389 to 2-399
data transfer modes, for supported devices
(table), 2-393 to 2-398
infoValue parameters (table),
2-391 to 2-392
intoType parameters (table),
2-390 to 2-391
using the function, 2-392 to 2-399
signal name equivalencies, E series (table),
2-387
single period measurement application,
2-218 to 2-220
single pulse generation application,
2-227 to 2-229
single pulse width measurement application,
2-220 to 2-223
single trigger mode, for DAQArb 5411
devices, 2-34
single triggered pulse generation application,
2-229 to 2-231
single triggered pulse width measurement
application, 2-223 to 2-225
single-point analog input functions
AI_Change_Parameter, 2-1 to 2-2
AI_Check, 2-3 to 2-4
AI_Clear, 2-5
AI_Configure, 2-6 to 2-9
AI_Read, 2-12 to 2-13
AI_Setup, 2-15 to 2-16
AI_VRead, 2-17 to 2-18
AI_VScale, 2-20 to 2-21
definition, 1-13
LabWindows function panel tree, 1-7
single-point analog output functions
AO_Calibrate, 2-25 to 2-26
AO_Change_Parameter, 2-27 to 2-37
AO_Configure, 2-38 to 2-41
AO_Update, 2-42
AO_VScale, 2-43 to 2-44
AO_VWrite, 2-45 to 2-46
AO_Write, 2-47 to 2-48
LabWindows function panel tree, 1-8