Filter
Top Products
Chapter 2 Function Reference — RTSI_Clock
NI-DAQ FRM for PC Compatibles 2-288
©
National Instruments Corporation
RTSI_Clock always returns an error if deviceNumber is not an AT-MIO-16X,
AT-MIO-64F-5, AT-AO-6/10, or a DIO 6533 (DIO-32HS). To connect the system clock
signal of any other device to the RTSI bus, you must change a jumper setting on the device.
See the appropriate user manual for instructions.
Note If you are using an E Series device, see the Select_Signal function.