Index
©
National Instruments Corporation I-7 NI-DAQ FRM for PC Compatibles
definition, 1-14
LabWindows function panel tree, 1-12
F
fax and telephone support, D-2
Fax-on-Demand support, D-2
FIFO transfer condition, 2-29 to 2-30
FIFO transfer count, 2-30 to 2-31
frequency shift keying, 2-234 to 2-235
FTP support, D-1
G
gain adjustment. See offset and gain
adjustment.
gain settings, DAQ devices (table), B-5
Get_DAQ_Device_Info function,
2-195 to 2-196
Get_NI_DAQ_Version function, 2-197
glitches, 2-28
GPCTR_Change_Parameter function,
2-198 to 2-208
default source selection for
ND_SIMPLE_EVENT_CNT or
ND_BUFFERED_EVENT_CNT
(table), 2-200
gpctrNum parameter, legal values for
(table), 2-199
ND_AUTOINCREMENT_COUNT,
2-206
ND_BUFFER_MODE, 2-207
ND_COUNT_1, ND_COUNT_2,
ND_COUNT_3, ND_COUNT_4,
2-206
ND_GATE, 2-203 to 2-204
default gate selection (table), 2-204
legal values for (table), 2-203
ND_GATE_POLARITY, 2-204
ND_INITIAL_COUNT, 2-205 to 2-206
ND_INPUT_CONDITIONING,
2-201 to 2-203
ND_OTHER_GPCTR_TC, definition of
other counter for (table), 2-200
ND_OUTPUT_MODE, 2-208
ND_OUTPUT_POLARITY, 2-208
ND_PRESCALE_VALUE, 2-201
ND_RELOAD_ON_GATE, 2-204
ND_SECOND_GATE, 2-205
ND_SECOND_GATE_POLARITY,
2-205
ND_SOURCE, legal values for (table),
2-199
ND_SOURCE_POLARITY, 2-201
ND_START_TRIGGER, 2-201
ND_UP_DOWN, 2-206 to 2-207
hardware control, 2-207
software control, 2-207
ND_Z_INDEX_PULSE, 2-204
GPCTR_Config_Buffer function,
2-209 to 2-210
GPCTR_Control function, 2-211 to 2-212
GPCTR_Read_Buffer function,
2-213 to 2-214
GPCTR_Set_Application function,
2-215 to 2-244
description, 2-215
ND_BUFFERED_EVENT_CNT
application, 2-235 to 2-237
ND_BUFFERED_PERIOD_MSR
application, 2-237 to 2-239
ND_BUFFERED_PULSE_WIDTH_MS
R application, 2-240 to 2-241
ND_BUFFERED_SEMI_PERIOD_MSR
application, 2-239 to 2-240
ND_BUFFERED_TWO_SIGNAL_EDG
E_SEPARATION_MSR application,
2-242 to 2-245
ND_FSK application, 2-234 to 2-235
ND_PULSE_TRAIN_GNR application,
2-232 to 2-234
ND_RETRIG_PULSE_GNR application,
2-231 to 2-232