Filter
Top Products
App-176
SD691
Backup
execution status
Backup execution
status display
(Percentage)
• Displays the execution status of data backup to the memory card in
percentage (0 to 100%).
• "0" is set when the backup starts.
S (Status
change)
New
QnU
*1
SD692
Restoration error
factor
Factor of error
occurred in the
restoration
Stores the factor of an error that occurred in the restoration.
Each error factor is as follows:
800H: The CPU module model name is not matched.
801H: The file password is set only for the restoration destination data or is
not matched.
810H: The verified backup data file is not matched or the backup data read
failed.
S (Error
occurrence)
New
SD693
Restoration
status
Current restoration
status
Stores the current restoration execution status.
Each error factor is as follows:
0 : Before restoration start
1 : Restoration in execution
2 : Restoration completed
FF: Restoration error
Sets "0" (Before restoring), however, when the restoration is completed
only during the automatic restoration.
S (Status
change)
New
SD694
Restoration
execution status
Restoration
execution status
display
(Percentage)
• Displays the execution status of restoration to the CPU module in
percentage (0 to 100%).
• "0" is set before the restoration.
Sets "0" (Before restoring), however, when the restoration is completed
only during the automatic restoration.
S (Status
change)
New
SD695
Specification of
writing to stan-
dard ROM
instruction count
Specification of
writing to standard
ROM instruction
count
• Specifies the maximum number of executions of the writing to standard
ROM instruction (SP.DEVST) to write to the standard ROM per day.
• When the number of executions of the writing to standard ROM
instruction exceeds the number of times set by SD695, “OPERATION
ERROR” (error code: 4113) occurs.
• The setting range for SD695 is 1 to 32767. If 0 or value outside the
range is set, “OPERATION ERROR” (error code: 4113) occurs at
execution of the writing to standard ROM instruction.
UNew QnU
SD696
Available
memory in
memory card
Available memory
in memory card
Stores the available memory in memory card. (Stores the value in 32-bit
binary.)
S (Backup in
operation)
New
QnU
*1
SD697
SD698
Backup data
capacity
Backup data
capacity
Stores the backup data capacity. (Stores the value in 32-bit binary.)
SD699
*1: The module whose first 5 digits of serial No. is "10102" or later. (Except the Q00UJCPU, Q00UCPU, and Q01UCPU)
Number Name Meaning Explanation
Set by
(When Set)
Corres-
ponding
ACPU
D9
Corresponding
CPU