Filter
Top Products
6-164
PWM
6.8.9 Pulse width modulation (PWM)
PWM
*1: Only output (Y) can be used.
Function
(1) Outputs the pulse of the cycle set by n2, for the amount of time ON designated by n1, to the
output module designated by .
(2) The setting ranges for n1 and n2 are shown below:
*2: The value specified by n1 should be less than the value specified by n2.
n1 : ON time or the number of the device where the ON time is stored (BIN 16 bits)
n2 : Frequency or the number of the device where the frequency is stored (BIN 16 bits)
: Number of the device to which pulses are output (bits)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
K, H
Other
Bit Word Bit Word
n1 ––
n2 ––
*1
–– ––
CPU Module Type Name Setting Range for n1 and n2 [ms] *2
High Performance model QCPU, Process CPU,
Universal model QCPU
1 to 65535 (0001
H
to FFFF
H
)
Process
High
performance
Universal
Basic
Redundant
Command
n2n1 DPWM PWM
D
D
D
n1
n2