Mitsubishi Electronics QCPU Welding System User Manual


  Open as PDF
of 1204
 
12-46
3105
[LINK PARA. ERROR]
In a multiple CPU system, the CC-Link module
under control of another station is specified as the
head I/O number of the CC-Link network
parameter.
Collateral information
• Common Information:File name/ Drive name
• Individual Information:Parameter number
Diagnostic Timing
• At power ON/At reset/STOP RUN
• Delete the CC-Link network parameter of the
CC-Link module under control of another station.
• Change the setting to the start I/O number of the
CC-Link module under control of the host station.
RUN:
Off
ERR.:
Flicker
CPU Status:
Stop
Q00/Q01
*1
Qn(H)
*1
QnPH
QnU
*10
[LINK PARA. ERROR]
• Though the number of CC-Link modules set in
the network parameters is one or more, the
number of actually mounted modules is zero.
• The start I/O number in the common parameters
is different from that of the actually mounted
module.
• The station type of the CC-Link module count
setting parameters is different from that of the
actually mounted station.
Collateral information
• Common Information:File name/ Drive name
• Individual Information:Parameter number
Diagnostic Timing
• At power ON/At reset/STOP RUN
• Correct and write the network parameters.
• If the error occurs after correction, it suggests a
hardware fault. (Contact your local Mitsubishi
representative.)
QCPU
[LINK PARA. ERROR]
• CC-Link module whose station type is set to
“master station (compatible with redundant
function)” is mounted on the extension base unit
in the redundant system.
• CC-Link module whose station type is set to
“master station (extension base)” is mounted on
the main base unit in the redundant system.
Collateral information
• Common Information:File name/ Drive name
• Individual Information:Parameter number
Diagnostic Timing
• At power ON/At reset/STOP RUN
QnPRH
*7
Error
Code
(SD0)
Error Contents and Cause Corrective Action
LED Status
CPU Status
Corresponding
CPU
*1 The function version is B or later.
*7 The module whose first 5 digits of serial No. is "09012" or later.
*10 The Universal model QCPU except the Q00UJCPU.