Filter
Top Products
7-421
SP.FWRITE
1
2
3
4
6
6
7
8
7.18 Other instructions
7.18.12 Writing Data to Designated File (SP.FWRITE)
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• Drive specified by drive designation device contains the medium other than the ATA
card. (Error code: 4100)
• Values specified in control data and the subsequent devices are out of the setting
range. (Error code: 4100)
• Value designated by "No. of request write data" ( ) is out of the setting range, or
exceeds the device range designated by ( +1) or the subsequent devices.
(Error code: 4101)
• Empty space in the ATA card is insufficient. (Error code: 4100)
• No free space is found when an attempt is made to create a new file.
(Error code: 4100)
• Invalid device is designated. (Error code: 4004)
• Access error occurred in the ATA card. (Error code: 4100)
• An unusable value is set for a file name ( ). (Error code: 4100)
• The attribute of a file name ( ) is "read only". (Error code: 4100)
• The device specified by or exceeds the range of the corresponding device.
(For the Universal model QCPU only.) (Error code: 4101)
S0
D0
S2
S2
S1
S1
D0
D1