Filter
Top Products
7-250
SIN(P)
7.12 Special function instructions
7.12.1 SIN operation on floating-point data (Single precision)
(SIN(P))
SIN(P)
*1: Applicable for the Universal model QCPU only.
Function
(1) Returns the SIN (sine) value of the angle designated at and stores the operation result in
the device number designated at .
(2) Angles designated at are set in radian units (degrees / 180).
For conversion between degrees and radian values, see the RAD and DEG instructions.
Basic model QCPU: The upper five digits of the serial No. are "04122" or larger.
: Angle data of which the SIN (sine) value is obtained or head number of the devices where the angle data is
stored (real number)
: Head number of the devices where the operation result will be stored (real number)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
E
Other
Bit Word Bit Word
–– ––
*1
––
–– ––
*1
–– ––
Process
High
performance
Redundant
Universal
Ver.
Basic
Command
Command
SINP
SIN
SINP
SIN S D
S D
S
D
S
D
S
D
+1
32-bit floating-point
real number
SIN (
)
+1
32-bit floating-point
real number
S
D
S
D
S