Filter
Top Products
7-360
(DT=,DT<>,DT>,DT<=,DT<,DT>=)
Operation Error
(1) Any operation errors do not occur in DT=,DT<>,DT>,DT<=,DT<,DT>= instruction.
Program Example
(1) The following program compares the data stored in D0 with the data (year, month, and day)
stored in D10, and makes Y33 be conductive status when the data stored in D0 meet the
data stored in D10.
[Ladder Mode] [List Mode]
(2) The following program compares the data stored in D0 with the current date data (year and
month), and makes Y33 be conductive status when the data stored in D0 do not meet the
current date data, when M0 is turned on.
[Ladder Mode] [List Mode]
(3) The following program compares the data stored in D0 with the data (year and day) stored in
D10, and makes Y33 be conductive status when the data value stored in D10 is smaller than
the data value stored in D0, when M0 is turned on.
[Ladder Mode] [List Mode]
(4) The following program compares the data stored in D0 with the current date data (year), and
makes Y33 be conductive status when the value of the current date data is the data value
stored in D0 or larger.
[Ladder Mode] [List Mode]
Step
Instruction
Device
Step
Instruction
Device
Step
Instruction
Device
Step
Instruction
Device