Filter
Top Products
7-358
(DT=,DT<>,DT>,DT<=,DT<,DT>=)
(c) The following table shows processing details of bits to be compared.
(7) If the data stored in the devices to be compared are not recognized as date data, SM709 will
be turned on after the instruction execution and no-conductive status will be made. Even if
they are not recognized as date data but the range of the devices is within the setting range,
SM709 will not be turned on.
Moreover, if the range of devices specified by to +2 or to +2 exceeds the range of
specified devices, SM709 will be turned on after the instruction execution and no-conductive
status will be made.
Once SM709 is turned on, on-status will be retained till when the CPU modules are reset or
powered off. Therefore, turn off SM709 if necessary.
(8) The following table shows the comparison operation results for each instruction.
n value for
comparison of
specified date data
with given date data
n value for
comparison of
specified date data
with current date data
Date to be
compared
Processing details
0001H 8001H Day
Comparison of days ( +2)
0002H 8002H Month
Comparison of months ( +1)
0003H 8003H Month, day
Comparison of months ( +1) and days ( +2)
0004H 8004H Year
Comparison of years ( )
0005H 8005H Year, day
Comparison of years ( ) and days ( +2)
0006H 8006H Year, month
Comparison of years ( ) and months ( +1)
0007H 8007H Year, month, day
Comparison of years ( ), months ( +1),
and days ( +2)
Other than 0001H to 0007H,8001H to 8007H No objects
No comparison of years ( ), months ( +1),
and days ( +2) (Non-conductive)
Instruction
symbols in
Condition
Comparison
operation result
Instruction
symbols in
Condition
Comparison
operation result
DT=
=
Conductive status
DT=
No-conductive
status
DT<>
DT<>
=
DT>
>
DT>
DT<=
DT<=
>
DT<
<
DT<
DT>=
DT>=
<
S1
S1
S1 S1
S1
S1 S1
S1 S1
S1 S1
S1
S1 S1
S1
S1 S1
S2 S2
S1
S2
S1
S2
S1
S2
S2
S1
S1
S2
S1
S2
S1
S2
S1
S2
S1
S2
S1
S2
S1
S2
S1 S2