Filter
Top Products
7-275
RAD(P)
1
2
3
4
6
6
7
8
7.12 Special function instructions
7.12.13 Conversion from floating-point angle to radian (Single precision) (RAD(P))
7.12.13 Conversion from floating-point angle to radian
(Single precision) (RAD(P))
RAD(P)
*2: Applicable for the Universal model QCPU only.
Function
(1) Converts units of angle size from angle units designated by to radian units, and stores
result at device number designated by .
(2) Conversion from degree to radian units is performed according to the following equation:
Basic model QCPU: The upper five digits of the serial No. are "04122" or larger.
: Angle to be converted to radian units or head number of the devices where the angle is stored (real number)
: Head number of the devices where the value converted in radian units will be stored (real number)
Setting
Data
Internal Devices
R, ZR
J\
U\G
Zn
Constants
E
Other
Bit Word Bit Word
–– ––
*2
––
–– ––
*2
–– ––
Process
High
performance
Redundant
Universal
Ver.
Basic
Command
Command
RADP
RAD
RADP
RAD S D
S D
S
D
S
D
S
D
+1
+1
S
D
S
D
32-bit floating-point
real number
(
)
32-bit floating-point
real number
( )rad
Radian unit = Degree unit x
180