Filter
Top Products
107
CHAPTER 4 MENUS
4.2.7 Save As
"Save As" stores the previously saved file under a new file name.
■ Save As
[Save As] stores the previously saved file under a new file name.
The text file, output window, project file, binary file, alias file, setup file, or coverage file can be selected as
the type of file.
If SOFTUNE WORKBENCH is not in the debug session, the binary file, alias file, setup file, and coverage
file are not displayed.
Figure 4.2-6 Save as Dialog Box
■ Saving the project file
Save the active project file.
Select the format for saving the project file from the [File Type] combo box.
For the project formats, refer to Section 1.2 Management Function for Project of SOFTUNE
WORKBENCH Function Manual.
If a Workspace project format (*.prj) is selected, it saves all project information in workspace project
format (compatible to workspace).
When the project file opened in old project format is overwritten in workspace project format, conversion is
performed and restrictions on old project files are cleared. Subsequent saving is performed in workspace
project format.
If an Old project format (*.prj) is selected, it saves information on active project configurations in old
project format (incompatible to workspace).
The project file opened in workspace project format cannot be overwritten in old project format. In this
case, save the file as a different name.
■ Saving the binary file
Specify a save start address in [Start Address]. When the binary file has been already loaded, the start
address at that time is set.
Specify a save end address in [End Address]. When the binary file has been already loaded, the end