Filter
Top Products
136
CHAPTER 4 MENUS
4.4.3 Assembly
"Assembly" displays the Disassemble Window.
■ Assembly
When the Assembly window is opened, the assembly is displayed, starting at the specified address. Line
assembly from the shortcut menu is also possible.
This function (command) can be used only when SOFTUNE WORKBENCH is in the debug session.
- When the Assembly Window has been already opened
The Assembly Window is activated.
- When the Assembly Window is not opened
The dialog for specifying the display start address (Figure 4.4-1 ) opens. Specify the address where
display is to be started, then click the [OK] button.
Figure 4.4-1 Dialog Box for Specifying Display Start Address
- Type (Line number/Address/Frame)
Specify the type of display position.
- Position
Display disassembling from the position specified in the above type.
■ Line assemble
Selecting [Line Assemble] from the shortcut menu opens the line assemble dialog shown in Figure 4.4-2 .
Figure 4.4-2 Inline Assemble Dialog Box
Writing a mnemonic in the [Mnemonic] edit box and clicking the [Update] button assembles and sets the
mnemonic, starting from the start address. The start address subsequently advances to the next address.
To change the address where the mnemonic is to be written, change [Start Address].
When mnemonic change is completed, click the [Close] button.