Filter
Top Products
219
CHAPTER 4 MENUS
4. Set the execution file to be registered.
- When the [Browse] button at the right of this field is clicked, the file selection dialog is displayed and
the tool execution file name can be selected from this dialog.
5. Set the option if necessary.
6. Set the execution-time directory if necessary.
- When the [Browse] button at the right of this field is clicked, the directory selection dialog is displayed
and the execution-time directory can be selected from this dialog.
7. Set [Enable], [Designate additional option when executing], and [Use Output window] if necessary.
- Select a category or two or more tools from the tree view to batch-change [Enable], [Designate additional
option when executing], and [Use Output window].
8. Set the temporary file data as necessary.
9. Click the [OK] button to complete setting.
■ Deletion procedure
1. Select [Project]-[Customize Build].
- The Customize Build setting dialog is displayed (Figure 4.5-40 ).
2. Use the tree view to select the title of the tool to delete.
- When a category is selected, all the tools in the category are deleted.
- Two or more tools can be also selected.
3. Click the [DELETE] button.
■ Start sequence change procedure
1. Select [Project]-[Set Customize Build].
- The Customize Build setting dialog is displayed (Figure 4.5-40 ).
2. Use the tree view to select the tools for which the start sequence is to be changed.
- Tools in the Before/After category are sequentially executed from the top.
3. Click the [UP] and [DOWN] buttons to arrange in the start sequence.
- Tools can be moved only within the category which the tools belong.