Filter
Top Products
69
CHAPTER 3 Windows
■ Shortcut Menu
Inline Assemble See Section 4.4.3 Assembly.
Jump Displays Jump Dialog Box.
Go to Current Displays current PC location.
Break See Section 4.6.4 Break Point.
Watch See Section 4.4.7 Watch.
Stack See Section 4.6.7 Stack.
Close Closes Disassemble Window.
- Jump
Specifies where in the Disassemble Window the cursor is to be displayed. Perform this operation in the
following procedure:
1. Click the right button of the mouse in the Disassemble Window to display the shortcut menu, then select
[Jump] from the menu. See Section 4.3.6 Jump.
2. Select a specification format.
3. Specify a cursor display position.
4. Click the [OK] button.