Filter
Top Products
194
CHAPTER 4 MENUS
4.5.5.4 Setting Assembler Options
This section explains how to set assembler options.
■ Setting assembler options
1. Click the [Assembler] tab from the project setup dialog box.
2. Select category.
[General], [Define Macro], [Include Path], [Target Depend], or [Output List] can be selected as category.
Specified options can be checked using [Option] at the bottom of the dialog.
If the individual option is set, the [Common Option] button can be clicked to return to the common
option. The macro description can be used to describe options. For the macro description, refer to
Section 1.11 in SOFTUNE WORKBENCH Function Manual.
■ Setting [General] Options
Figure 4.5-21 General Option Setup Dialog Box
The following options can be set from the general option setup dialog box.
- Outputs start message (-V)
- Outputs debug information (-g)