Filter
Top Products
291
CHAPTER 4 MENUS
4.7.9 Tool Startup
This section explains how to start a registered external tool.
■ Starting an external tool
The tools set by Section 4.7.5 Tool... are registered in the submenu. A tool can be started by selecting it
from this submenu.
Setting a check mark to the left of [Designate Additional Option when Executing] in tool setup opens the
additional option setup dialog box shown in Figure 4.7-32 before the tool is started. Set an additional option
from this dialog box, then click the [OK] button.
The option specified from this dialog box is added after the option specified in tool setup and the tool is
started.
Figure 4.7-32 Additional Option Setup Dialog Box