Filter
Top Products
213
CHAPTER 4 MENUS
4.5.5.9 Setting Debug Options
This section explains how to set debug options.
■ Setting debug options
1. Click the [Debug] tab from the project setup dialog box.
The debug option setup dialog box shown in Figure 4.5-38 opens.
2. Select category.
[General] or [Setup] can be selected as category.
■ Setting Options in [General]
1. Set an alias file.
Clicking the [...] button to the right of the input field enables file reference.
2. When setting other options, write them in [Other Parameter].
Figure 4.5-38 Debug Option Setup Dialog Box
■ Setting Options in [Setup]
1. Click the [Debug] tab from the project setup dialog box.
2. Select [Setup] category.