Filter
Top Products
215
CHAPTER 4 MENUS
■ Changing debugger setup
1. Click [Debug] tab from the project setup dialog box.
2. Select [Setup] category.
3. Select the setup name to be changed from [Setup Name List].
4. Click the [Change Setup] button.
Setup Wizard is started. See Section 4.7.2.4 Setup Wizard.
■ Changing setup name
1. Click [Debug] tab from the project setup dialog box.
2. Select [Setup] category.
3. Select the setup name to be changed from [Setup Name List].
4. Click the [Change Setup Name] button.