Filter
Top Products
181
CHAPTER 4 MENUS
4.5.5.1 General
This section explains the items that can generally be set in the [Setup Project] dialog.
■ Setting of General
1. Click the [General] tab in the [Setup Project] dialog.
2. Set the following items as needed.
[Remove this file from target of Build]
[Project type]
[Output Directory]
Figure 4.5-8 Setup Project Dialog-General
- Remove this file from target of build
The file selected in the tree view is removed from the Make/Build target. This item can be set when C
source file, Assembler source file, Library file, Object file, or Relative file is selected.
- Project
The full path to the project file is displayed.